-
Self-healing high tech plastic film (scratches disappear automatically)
-
Can be removed without leaving residues
-
Protective film with self-repairing mechanism
-
Display protection film
-
High tech display protection
-
Highly transparent special film
Contents:
Due to daily use, mobile phone displays become scratched very quickly. Not only do ugly scratches limit the readability of the display, but they also reduce the value of your mobile phone. As a rule, conventional protective films for displays become scratched very quickly and must be changed frequently.
THE SOLUTION:
The DISPLEX PROTECTOR sets a new standard in the area of display protection. This high tech film is extremely scratch-resistant, fits precisely and can be removed at any time without residues. Simply stick the protective film on the display and the amazing protective effect provides a lasting, clear view right away whilst protecting your phone's value. One extra feature is that you will receive a 2-year warranty against scratches. The DISPLEX PROTECTOR is available for all common models.
HOW IT WORKS:
During regular use, the DISPLEX PROTECTOR keeps the display free of any scratches. The great elasticity of this completely novel high tech film provides a type of self-repairing (memory) effect. Scratches in the film disappear automatically after a short time! Thus, neither scratches nor dirt can damage the display. The DISPLEX PROTECTOR offers reliable and permanent protection for your display - simply amazing!
THE ADVANTAGES:
100% protection from scratches and dirt
Fits display layout exactly
Self-healing high tech plastic film
Can be removed without residues
Fitting instructions:
1.
2.
3.
4.
5.
6.
Pasting the film:
1) Clean the display with a cloth.
2) To avoid holding the film on the adhesive side during assembly, use an approximately 4 cm long adhesive tape (Scotch) as mounting aid.
3) Bring the adhesive tape to the lower area of the film in such a way that about 2 cms of it protrudes over the edge of the film (Figure 1).
4) Now hold the projecting part of the adhesive tape and pull the film out about 2 cm from the supporting paper carefully (Figure 2).
5) In the next step, bend the part of the supporting paper that is now free without touching the adhesive surface of the film (Figure 3).
6) Now adjust and paste the free section of the film carefully and exactly on the lower edge of the display (Figure 4).
7) Pull the rest of the supporting paper out slowly, only if this initial part of the film is pasted exactly on the display, and simultaneously paste the film that is released gradually on the display (Figure 5).
8) Now remove the adhesive tape (Scotch) carefully.
9) Finally, press the film on the display firmly with a credit card (or similar object) till air bubbles and uneven gaps are straightened out (Figure 6).
10) If gaps or air bubbles still remain, these will normally disappear on their own within the next 24 hours. If there are big air bubbles, lift the film up to the bubble slowly and carefully, and paste it on the display afresh.
CAUTION: Do not hold the film by applying your fingers on the adhesive side! To remove the film, take it off carefully, slowly and without using any force.
Fonejunkie can not be liable in case of improper handling or non-observation of the instructions in the user document.
